Available Mon - Fri 9 to 5 PM EST
Available Mon - Fri
9 to 5 PM EST
5.0 / 5.0
1 Review
Seamless steel tubing Wide variety of bends so you get that just-right fit and feel Made in the U.S.A.
5.0 / 5.0
1 Review
Steel construction Always check slider covers for proper clearance. Bottom area of slider covers may need to be formed slightly to clear lo...
View full details5.0 / 5.0
1 Review
Sold as a kit of two risers, one-piece top clamp and all necessary hardware Available for handlebars that have a 1" or 1-1/2" diameter clampi...
View full details5.0 / 5.0
1 Review
Risers are machined from billet aluminum Fit any handlebars that have a 1" diameter in the clamping area, and have 1-1/4" riser diameter to c...
View full details5.0 / 5.0
1 Review
Include lever and clamp half Compatible with DOT 4 or 5 brake fluid Master cylinders work with all 1" or 1-1/4" diameter handlebars
5.0 / 5.0
1 Review
Die-cast clamp for most 74-17 models with 3-1/2" on-center risers and offset mounting holes Fits 1" OD diameter bars
5.0 / 5.0
1 Review
Top-quality lever sets resemble the late-style wide, flat design Constructed of lightweight aluminum Levers are compatible with OEM lever p...
View full details5.0 / 5.0
1 Review
Include lever and clamp half Compatible with DOT 4 or 5 brake fluid Master cylinders work with all 1" or 1-1/4" diameter handlebars
5.0 / 5.0
1 Review
Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with bearings installed and end...
View full details5.0 / 5.0
1 Review
Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with bearings installed and end...
View full details5.0 / 5.0
1 Review
Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with bearings installed and end...
View full details5.0 / 5.0
1 Review
Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully assembled and trued with bearings installed and end...
View full details5.0 / 5.0
1 Review
Make hard-to-reach kickstands easier to operate Includes mounting hardware Drilling required
5.0 / 5.0
1 Review
Include lever and clamp half Compatible with DOT 4 or 5 brake fluid Master cylinders work with all 1" or 1-1/4" diameter handlebars
5.0 / 5.0
1 Review
Traditional D-shaped floorboards feature forged aluminum construction with a chrome finish Floorboards and inserts are sold in pairs and must...
View full details5.0 / 5.0
1 Review
Ground finish Drilled for better heat dissipation and consistent braking in wet weather Designed for use with OEM calipers and most afterma...
View full details5.0 / 5.0
1 Review
Complete rear master cylinder assemblies Polished and chrome-plated Polished and chrome-plated
5.0 / 5.0
1 Review
Complete rear master cylinder assemblies Polished and chrome-plated Polished and chrome-plated
5.0 / 5.0
1 Review
Complete rear master cylinder assemblies Polished and chrome-plated Polished and chrome-plated
5.0 / 5.0
1 Review
Complete rear master cylinder assemblies Polished and chrome-plated Polished and chrome-plated
5.0 / 5.0
1 Review
High-quality spin-on filters are a dependable replacement for most H-D models
5.0 / 5.0
1 Review
Improved inner clutch hub with reinforced insert Accepts all OEM components Replacement Part for OEM Number(s) 3755411 2016-2017 Harley-D...
View full details5.0 / 5.0
1 Review
OEM black texture powder-coat with highlighted fins Excellent for stock replacement
5.0 / 5.0
1 Review
Die-cast construction Matches other Drag Specialties Split Skull products
5.0 / 5.0
1 Review
High quality replacement components Sold each
5.0 / 5.0
1 Review
Mount with existing hardware Not for use with hydraulic clutch.
5.0 / 5.0
1 Review
High-quality replacement sensors
5.0 / 5.0
1 Review
Die-cast aluminum construction Hardware and bushing not included 2006 Harley-Davidson Street Glide FLHX - - 2006 Harley-Davidson Screamin' E...
View full details5.0 / 5.0
1 Review
Heavy-duty replacements, perfect for stock motors Meet or exceed OEM specifications Come completely fitted and ready to install Complete ...
View full details5.0 / 5.0
1 Review
OEM quality cast aluminum alloy construction Some fitments feature pistons with a coating that extends piston life, reduces friction and allo...
View full details5.0 / 5.0
1 Review
Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner for smooth operation ...
View full details5.0 / 5.0
1 Review
Quick Connect braided upper clutch cables economically replace the OE upper cable section on select models Easily and quickly connects to the...
View full details5.0 / 5.0
1 Review
Made in the U.S.A.
5.0 / 5.0
1 Review
Economical alternative to billet clamps
5.0 / 5.0
1 Review
Meets or exceeds OEM specification Replacement screws available separately Top plate installation screws are single-use and should be repla...
View full details5.0 / 5.0
1 Review
The ultimate 1-1/4" diameter handlebar, designed for maximum comfort 1" diameter in clamping area Springer-style bars have 4-3/4" center di...
View full details5.0 / 5.0
1 Review
3/16” ABS thermoformed seat base with fully carpeted bottom finishes off the seat and rubber bumpers to protect paint The Extended Reach seat...
View full details5.0 / 5.0
1 Review
3/16" ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint Fits with all Drag and most Ha...
View full details5.0 / 5.0
1 Review
Custom-molded polyurethane foam interior for maximum comfort 3/16" ABS thermoformed seat base for a perfect fit Fully carpeted bottom to pr...
View full details5.0 / 5.0
1 Review
3/16" ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint Fits with all Drag and most Ha...
View full details5.0 / 5.0
1 Review
Pad assembly does not include mounting hardware; hardware is included with receiver mechanism (PN #0822-0163) EZ Glide™ receiver mechanism al...
View full details5.0 / 5.0
1 Review
Backrests features one lower detent that plugs into the seat and remains stationary, seat does not adjust up and down Chrome plated hardware ...
View full details5.0 / 5.0
1 Review
Steel tubing Slotted and notched for Throttle-By-Wire (TBW) applications Accepts OEM heated grips Made in the U.S.A.
5.0 / 5.0
1 Review
Handlebars for the "biggest fattest" look Features a full 1-1/2" diameter in the clamping area Designed for use with 96 and newer style con...
View full details5.0 / 5.0
1 Review
Dampen unwanted fork oscillations (speed wobble) Seven-position hydraulic steering dampers Fully adjustable; allows full-fork movement from...
View full details5.0 / 5.0
1 Review
Sold as a kit of two risers, one-piece top clamp and all necessary hardware Available for handlebars that have a 1" or 1-1/2" diameter clampi...
View full details5.0 / 5.0
1 Review
Die-cast clamp for most 74-17 models with 3-1/2" on-center risers and offset mounting holes Fits 1" OD diameter bars
5.0 / 5.0
1 Review
Chrome switch housings available separately Master cylinders accept OEM-style rebuild kits and have clearance for all 1-1/4" handlebars Mod...
View full detailsIt looks great on my Harley front fender
great product!!
Perfect
Really a no-frills transaction as they as they all should be: product as advertised, at a good price, delivered promptly. Service on the phone was also very to-the-point and courteous. Will consider buying from Magma again.
FAST SHIPPING, PARTS FIT GREAT, HIGHLY RECCOMEND THIS SELLER
Yep
A++
Great product - thanks
Very fast shipping and product as described.
Great seat cover
What I needed.
Awesome Seller!!!,😊
As advertised
Perfect, Thank you!! Highly recommended seller!!
Fast shipping and great service! Product looks great
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}