Available Mon - Fri 9 to 5 PM EST
Available Mon - Fri
9 to 5 PM EST
5.0 / 5.0
1 Review
Feature a trip meter and four LEDs built into the face of the speedometer Blue for high beam, green for neutral, red for oil pressure and yel...
View full details5.0 / 5.0
1 Review
Speedometers have 5/8"-18 thread Speedometers include reset knob Mileage cannot be reset on speedometers
5.0 / 5.0
1 Review
Two years of development and design went into producing a superior regulator Fully assembled in the USA with domestic made electrical boards ...
View full details5.0 / 5.0
1 Review
Two years of development and design went into producing a superior regulator Fully assembled in the USA with domestic made electrical boards ...
View full details5.0 / 5.0
1 Review
Final belt drive guard Made in the U.S.A.
5.0 / 5.0
1 Review
State-of-the-art design Smooth function, 12V, 8000 rpm Stainless steel water-resistant housing Black face w/ white needle Backlit with ...
View full details5.0 / 5.0
1 Review
.300" diameter snap-in indicator lights replace OEM units Includes retainer clip
5.0 / 5.0
1 Review
Sold as a kit of two risers, one-piece top clamp and all necessary hardware Available for handlebars that have a 1" or 1-1/2" diameter clampi...
View full details5.0 / 5.0
1 Review
Chrome housing 1" Clamp fits 7/8" and 1" diameter handlebars includes all necessary mounting hardware Uses SR626SW battery Features bla...
View full details5.0 / 5.0
1 Review
Designed specifically as a direct bolt-on upgrade for Road Glide models Bars include black control clamps to replace the "oversize" OEM clamp...
View full details5.0 / 5.0
1 Review
The ultimate 1-1/4" diameter handlebar, designed for maximum comfort 1" diameter in clamping area Slotted and notched for Throttle-By-Wire ...
View full details5.0 / 5.0
1 Review
Handlebars for the "biggest fattest" look Custom bends for the ultimate in comfort Designed for use with 96 and newer style controls and ma...
View full details5.0 / 5.0
1 Review
Risers are machined from billet aluminum For use with Drag Specialties 1-1/2" Big Buffalo bars or other bars with a 1-1/2" diameter clamping ...
View full details5.0 / 5.0
1 Review
Steel construction Approximately 4-5/8" diameter Round horn covers replace the stock "cowbell" cover found on most 91-16 Big Twin and XL mo...
View full details5.0 / 5.0
1 Review
Die-cast aluminum construction Pinch bolt is included
5.0 / 5.0
1 Review
Die-cast aluminum construction Pinch bolt is included
5.0 / 5.0
1 Review
Replacement lenses and LED boards available separately Not DOT compliant.
5.0 / 5.0
1 Review
Levers are compatible with OEM lever perches Constructed of lightweight aluminum
5.0 / 5.0
1 Review
Replace the stock axle and the ugly end nut Steel construction with chrome ends Optional bullet axle caps add a streamlined, finished look ...
View full details5.0 / 5.0
1 Review
Handlebars for the "biggest fattest" look Custom bends for the ultimate in comfort Designed for use with 96 and newer style controls and ma...
View full details5.0 / 5.0
1 Review
Made from 1.5" diameter steel tubing Made in the U.S.A.
5.0 / 5.0
1 Review
Features clear-coated stainless steel braided extended lines with chrome steel fittings For matching lower and mid lines on ABS models, see s...
View full details5.0 / 5.0
1 Review
Features clear-coated stainless steel braided extended lines with chrome steel fittings For matching lower and mid lines on ABS models, see s...
View full details5.0 / 5.0
1 Review
Features black vinyl-coated braided extended lines with chrome steel fittings Made in the U.S.A. All measurements are approximate.
5.0 / 5.0
1 Review
Features braided lines with chrome steel fittings Made in the U.S.A.
5.0 / 5.0
1 Review
Features braided lines with chrome steel fittings Made in the U.S.A.
5.0 / 5.0
1 Review
Features black vinyl-coated braided extended lines with chrome steel fittings Made in the U.S.A. All measurements are approximate.
5.0 / 5.0
1 Review
Features braided lines with chrome steel fittings Made in the U.S.A.
5.0 / 5.0
1 Review
All measurements are approximate Made in the U.S.A.
5.0 / 5.0
1 Review
All measurements are approximate Made in the U.S.A.
5.0 / 5.0
1 Review
All measurements are approximate Made in the U.S.A.
5.0 / 5.0
1 Review
All measurements are approximate Made in the U.S.A.
5.0 / 5.0
1 Review
Replaces the stock rubber lower crossover lines with stainless steel lines Seals with compression fittings for a positive seal Made in the ...
View full details5.0 / 5.0
1 Review
Features chrome steel fittings Made in the U.S.A. Meet DOT specifications All measurements are approximate.
5.0 / 5.0
1 Review
Features braided lines with chrome steel fittings Made in the U.S.A.
5.0 / 5.0
1 Review
Features black vinyl-coated braided extended lines with chrome steel fittings Made in the U.S.A. All measurements are approximate.
5.0 / 5.0
1 Review
Features black vinyl-coated braided extended lines with chrome steel fittings Made in the U.S.A. All measurements are approximate.
5.0 / 5.0
1 Review
Features black vinyl-coated braided extended lines with chrome steel fittings Made in the U.S.A. All measurements are approximate.
5.0 / 5.0
1 Review
Features black vinyl-coated braided extended lines with chrome steel fittings Made in the U.S.A. All measurements are approximate.
5.0 / 5.0
1 Review
Features black vinyl-coated braided extended lines with chrome steel fittings Made in the U.S.A. All measurements are approximate.
5.0 / 5.0
1 Review
Features black vinyl-coated braided extended lines with chrome steel fittings Made in the U.S.A. All measurements are approximate.
5.0 / 5.0
1 Review
Features black vinyl-coated braided extended lines with chrome steel fittings Made in the U.S.A. All measurements are approximate.
5.0 / 5.0
1 Review
Features clear-coated stainless steel braided extended lines with chrome steel fittings For matching lower and mid lines on ABS models, see s...
View full details5.0 / 5.0
1 Review
Features clear-coated stainless steel braided extended lines with chrome steel fittings For matching lower and mid lines on ABS models, see s...
View full details5.0 / 5.0
1 Review
Features braided lines with chrome steel fittings Made in the U.S.A.
5.0 / 5.0
1 Review
Features clear-coated stainless steel braided extended lines with chrome steel fittings For matching lower and mid lines on ABS models, see s...
View full details5.0 / 5.0
1 Review
Features clear-coated stainless steel braided extended lines with chrome steel fittings For matching lower and mid lines on ABS models, see s...
View full details5.0 / 5.0
1 Review
Features braided lines with chrome steel fittings Made in the U.S.A.
It looks great on my Harley front fender
great product!!
Perfect
Really a no-frills transaction as they as they all should be: product as advertised, at a good price, delivered promptly. Service on the phone was also very to-the-point and courteous. Will consider buying from Magma again.
FAST SHIPPING, PARTS FIT GREAT, HIGHLY RECCOMEND THIS SELLER
Yep
A++
Great product - thanks
Very fast shipping and product as described.
Great seat cover
What I needed.
Awesome Seller!!!,😊
As advertised
Perfect, Thank you!! Highly recommended seller!!
Fast shipping and great service! Product looks great
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}