Available Mon - Fri 9 to 5 PM EST
Available Mon - Fri
9 to 5 PM EST
5.0 / 5.0
1 Review
Side plates feature raised accent on select applications Easy, bolt-on design - no drilling required Work great with Square Sissy Bars - so...
View full details5.0 / 5.0
1 Review
Side plates feature raised accent on select applications Easy, bolt-on design - no drilling required Work great with Square Sissy Bars - so...
View full details5.0 / 5.0
1 Review
Side plates feature raised accent on select applications Easy, bolt-on design - no drilling required Work great with Square Sissy Bars - so...
View full details5.0 / 5.0
1 Review
Replace a damaged OEM grab bar or add to bikes that do not have a stock rail Chrome-plated steel construction Include all necessary mountin...
View full details5.0 / 5.0
1 Review
Allows quick removal of Tour Box on Dresser models Compatible with OEM quick-detach mounts Constructed of durable steel Drilled for mount...
View full details5.0 / 5.0
1 Review
Chrome reset knobs fit late-model speedos
5.0 / 5.0
1 Review
A duplicate of the OE oil tank Includes filler cap Approximately 3.0 quart capacity
5.0 / 5.0
1 Review
Chromed replacement battery top covers fit precisely and feature vibration-absorbing cushions
5.0 / 5.0
1 Review
Simple bolt-on installation
5.0 / 5.0
1 Review
Levers are compatible with OEM lever perches
5.0 / 5.0
1 Review
Rebuild kits fit a variety of H-D models listed Meet or exceed OEM specifications Include metal piston
5.0 / 5.0
1 Review
Feature encapsulated magnets in a reinforced steel shell Direct OEM replacements
5.0 / 5.0
1 Review
Chromed 1/8" thick steel exhaust hangers
5.0 / 5.0
1 Review
Each set includes caps for both the axle nut and axle head (where required), setscrews and hex key wrench Each cap has an internal hex to all...
View full details5.0 / 5.0
1 Review
Replacement component for chrome kickstands
5.0 / 5.0
1 Review
Flat reinforced pedal Includes swivel
5.0 / 5.0
1 Review
Polished, then chrome plated Made from cold-rolled steel
5.0 / 5.0
1 Review
Polished, then chrome plated Made from cold-rolled steel
5.0 / 5.0
1 Review
Quality 5” speedometer heads are available in 2240:60 ratios Features 12mm thread and comes with a gasket Mileage cannot be reset on speedo...
View full details5.0 / 5.0
1 Review
Speedometers have 5/8"-18 thread Speedometers include reset knob Mileage cannot be reset on speedometers
5.0 / 5.0
1 Review
Chrome mount attaches at the crankcase and rocker box mounting bolt, allowing an unobstructed view of your oil pressure Stock oil pressure se...
View full details5.0 / 5.0
1 Review
A chromed 5/8" square steel block with 3/8"-24 thread is included for custom frame tab mounting Screw onto the lower shock mounts of pre-72 H...
View full details5.0 / 5.0
1 Review
Another unique design from Drag and Arlen Ness Protective rubber rails run completely around diameter for great looks no matter how pegs rota...
View full details5.0 / 5.0
1 Review
Water-resistant and vibration-resistant Accept 12mm cable Backlit with 12V bulb; replacement bulbs available separately Matching Drag Spe...
View full details5.0 / 5.0
1 Review
Includes spark plug wires Spark plug wire also available separately
5.0 / 5.0
1 Review
Build custom-length cables for an exact fit Each kit contains the following: 25' cable (1), 1/4" terminals (20), 3/8" terminals (8), 5/16" te...
View full details5.0 / 5.0
1 Review
Water-resistant and vibration-resistant Accept 12mm cable Backlit with 12V bulb; replacement bulbs available separately Matching Drag Spe...
View full details5.0 / 5.0
1 Review
Water-resistant and vibration-resistant Accept 12mm cable Backlit with 12V bulb; replacement bulbs available separately Matching Drag Spe...
View full details5.0 / 5.0
1 Review
High-strength steel kickstand Replace OEM kickstands perfectly Big Twin, Softail, FLT and XL kickstands are measured from the first bend at...
View full details5.0 / 5.0
1 Review
Seamless steel tubing Wide variety of bends so you get that just-right fit and feel Made in the U.S.A.
5.0 / 5.0
1 Review
Billet aluminum construction Two-piece clamp-on design Fit most 1-1/4" T-Bars with 3-1/2" on-center pullback risers Made in the U.S.A. ...
View full details5.0 / 5.0
1 Review
Strong, quality spoke sets used in stock and custom applications All sets include nipples and spoke wrench for installation Not for use wit...
View full details5.0 / 5.0
1 Review
Heavy gauge steel with reinforced seams Come complete with extra-strong mounting tabs, and mounting hardware Petcocks sold separately
5.0 / 5.0
1 Review
High-quality replacement components
5.0 / 5.0
1 Review
Rear master cylinder assembly cover for Drag Specialties parts Chrome finish Sold as each
5.0 / 5.0
1 Review
Mounts easily to underside of hitch ball for a quick, clean way to connect/disconnect trailer light wiring Includes a chromed receptacle plat...
View full details5.0 / 5.0
1 Review
Cast-iron cylinders meet or exceed OEM tolerance specifications Withstand greater pressure and heat than stock
5.0 / 5.0
1 Review
Cast-iron cylinders meet or exceed OEM tolerance specifications Withstand greater pressure and heat than stock
5.0 / 5.0
1 Review
OEM quality cast aluminum alloy construction Some fitments feature pistons with a coating that extends piston life, reduces friction and allo...
View full details5.0 / 5.0
1 Review
Risers are machined from billet aluminum Fit any handlebars that have a 1" diameter in the clamping area, and have 1-1/4" riser diameter to c...
View full details5.0 / 5.0
1 Review
Designed for specific Indian® motorcycle models For use with OEM stock air filter housings Meets or exceeds OEM specifications
5.0 / 5.0
1 Review
Mufflers offer increased performance with a great sound 28" overall length Removable louvered steel baffles Mount with existing hardware ...
View full details5.0 / 5.0
1 Review
Features black vinyl-coated braided extended lines with chrome steel fittings Made in the U.S.A. All measurements are approximate.
5.0 / 5.0
1 Review
Features black vinyl-coated braided extended lines with chrome steel fittings Made in the U.S.A. All measurements are approximate.
5.0 / 5.0
1 Review
Features clear-coated stainless steel braided extended lines with chrome steel fittings For matching lower and mid lines on ABS models, see s...
View full details5.0 / 5.0
1 Review
Features clear-coated stainless steel braided extended lines with chrome steel fittings For matching lower and mid lines on ABS models, see s...
View full details5.0 / 5.0
1 Review
Features braided lines with chrome steel fittings All measurements are approximate Made in the U.S.A.
5.0 / 5.0
1 Review
Features braided lines with chrome steel fittings All measurements are approximate Made in the U.S.A.
It looks great on my Harley front fender
great product!!
Perfect
Really a no-frills transaction as they as they all should be: product as advertised, at a good price, delivered promptly. Service on the phone was also very to-the-point and courteous. Will consider buying from Magma again.
FAST SHIPPING, PARTS FIT GREAT, HIGHLY RECCOMEND THIS SELLER
Yep
A++
Great product - thanks
Very fast shipping and product as described.
Great seat cover
What I needed.
Awesome Seller!!!,😊
As advertised
Perfect, Thank you!! Highly recommended seller!!
Fast shipping and great service! Product looks great
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}