Available Mon - Fri 9 to 5 PM EST
Available Mon - Fri
9 to 5 PM EST
Features braided lines with chrome steel fittings All measurements are approximate Made in the U.S.A.
All measurements are approximate Made in the U.S.A.
All measurements are approximate Made in the U.S.A.
All measurements are approximate Made in the U.S.A.
All measurements are approximate Made in the U.S.A.
Visors are easy to install; add a custom look Chrome steel construction
Visors are easy to install; add a custom look Chrome steel construction
Halogen bulbs
Die-cast levers Clean, custom styling Wide blade fits hand perfectly
Wide blade levers sets are made with strong, high-quality aluminum with CNC-machined slots Includes anti-rattle clip and clutch lever pivot b...
View full detailsDirect replacement for most 7" headlights Die-cast aluminum housing offering rugged durability and state-of-the-art LEDs DOT compliant Ma...
View full detailsCustomize the most visible area the factory overlooked - the handlebar controls Designed to work with all 1-1/4" diameter handlebars Chrome...
View full detailsKit includea master cylinder assembly, clutch lever assembly, die-cast switch housings with radiused edges and OEM-style clamps Kit for '11-'...
View full detailsStandard-duty replacement spring Made in the U.S.A.
High-quality components to repair common failures of OEM Harley starters
Replacement cover gasket for stock master cylinder
Brake pedal pad in a large, easy-to-use design with replaceable rubber pad and mounting bolt Brake pedal not included.
Clamp assemblies includes clamps, tapered washers and all necessary nuts and bolts Clamp is a replacement for the clamp assembly supplied wit...
View full detailsSpeedometers have 12mm thread To install speed heads on 47-67 FL, use cable adapter PART #2210-0062 (sold separately) Mileage cannot be res...
View full details
DRAG SPECIALTIES 5" MPH FL-Style 2:1 Speedometer with Tach - '68-'84 Black Face NO RESET KNOB 72418M
Speedometers have 12mm thread To install speed heads on 47-67 FL, use cable adapter PART #2210-0062 (sold separately) Mileage cannot be res...
View full detailsUnique skull head ornament with illuminated eyes Fits most front fenders Die-cast alloy construction with a chrome-plated finish
Die-cast clamp for most 74-17 models with 3-1/2" on-center risers and offset mounting holes Fits 1" OD diameter bars
Die-cast chrome aluminum mirrors in a sleek teardrop design Approximately 6" x 3"
A molded black rubber boot for 4- and 5-speed starter solenoids
Works with Speedometer Housing
Die-cast, chrome-plated dash/speedometer housing comes complete with lenses and a dash strip
Complete rear master cylinder assemblies Polished and chrome-plated Polished and chrome-plated
Contains all necessary parts and hardware to install saddlebags and saddlebag lid hinges Kit includes lid hinges, lid gaskets, tethers, latch...
View full detailsLock kit to be used with Tour-Pak®
Original-style tachometer, manufactured to exact OEM specifications Features an 8000 rpm face and a stainless steel bezel 2-3/4" diameter b...
View full detailsChrome die-cast housing Head measures 5-3/8" x 3-1/4"
Housing is smooth Includes an 60/55W bulb and low-intensity running light Mounting block included Replacement/optional chrome trim ring a...
View full detailsIncludes H3 12V 55W bulb DOT/ECE compliant
Includes H3 12V 55W bulb DOT/ECE compliant
Chrome housing Red lens with top tag window Includes 1157-style 23/8W bulb Not DOT compliant.
Notched for electronic throttle control Drilled for internal wiring Made in the U.S.A.
Notched for electronic throttle control Drilled for internal wiring Made in the U.S.A.
Steel tubing in a variety of finishes Made in the U.S.A.
Steel tubing in a variety of finishes Made in the U.S.A.
Seamless steel tubing Wide variety of bends so you get that just-right fit and feel Made in the U.S.A.
Ape hanger handlebars for 1" applications
Die-cast clamp for most 74-17 models with 3-1/2" on-center risers and offset mounting holes Fits 1" OD diameter bars
Die-cast clamp for most 74-17 models with 3-1/2" on-center risers and offset mounting holes Fits 1" OD diameter bars
Chrome finish Includes gasket and mounting screws
Exceptional design by Tank Tuff Cycles only available from Drag Specialties Mirror head measures 3" x 5" with plain glass Mount on left or ...
View full detailsFeatures solar-reflective leather in the seating area and automotive-grade vinyl on the sides (unless noted); patented process reduces surface tem...
View full details3/16" ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint Fits with all Drag and most Ha...
View full details3/16" ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint Fits with all Drag and most Ha...
View full detailsIt looks great on my Harley front fender
great product!!
Perfect
Really a no-frills transaction as they as they all should be: product as advertised, at a good price, delivered promptly. Service on the phone was also very to-the-point and courteous. Will consider buying from Magma again.
FAST SHIPPING, PARTS FIT GREAT, HIGHLY RECCOMEND THIS SELLER
Yep
A++
Great product - thanks
Very fast shipping and product as described.
Great seat cover
What I needed.
Awesome Seller!!!,😊
As advertised
Perfect, Thank you!! Highly recommended seller!!
Fast shipping and great service! Product looks great
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}
